Back to top
STFE
Textil arkitektur

STFE

Structural and transparent innovative skin for building envelope.
Fördelar
Structural strenght
The polyarylate mesh provides structural strength for large free span and minimizes secondary structure. Easier installation and reduced environmental impact.
Transparency
As a building skin, STFE disappears and becomes transparent to leave room to the horizon.
Light transmission
50% light transmission - Natural light and sun glass effect for user's comfort and to enable plant growth thanks to UV.
Användningsområde
Hall in stfe serge ferrari

No feeling of being enclosed in public buildings: Transportation walkway, Shopping mall, Skylight, Atrium.

Stadium

Natural light and UV inputs: Stadium, sport hall.

Pedestrian protection: Walkway, pedestrian path

Natural light and UV inputs: Zoo & botanical garden, Winter garden...

Färgkarta

STFE

7902-51204
Tekniska specificationer

TRANSPARENCY AND SUNGLASS EFFECT
As a building skin, STFE disappears and becomes transparent to leave room to the horizon.

transparency-stfe
  Technical properties* Standards
Product Code  7902  
Material composition Outer surface : Transparent hybrid fluoropolymer
Inner surface : polyarylate mesh
 
Weight 900 g/m²  EN ISO 2286-2
Width 155 cm  
Tensile strength
(warp/weft)
400/400 daN/5cm EN ISO 1421
Tear strength (warp/weft)
Elongation at break (warp/weft)
80/80 daN/5cm
4,6 / 3,5%
DIN 53.363
Crease fold resistance 100% ASTM D4851
Flame retardancy
Euroclass B, s1-d0 EN 13501-1
Thermal, Solar Optical & Acoustic properties
Heat transfer coefficient (vertical/
horizontal)
5,6 / 6,4 W/sqm.°C Calculated
Visible Light Transmittance (Tv) Tv n-h=53% EN 410
Direct Tv (view through) Tv n-n=46% EN 410
Visible Light Reflexion (Rv) 7% EN 410
Solar Transmittance (Ts) 54% EN 410
Solar Reflexion (Rs) 7% EN 410
Solar factor (g) 64% EN 410
UV transmittance (T uv-A)
                             (T uv-B)
57,8%
52,3%
EN 410
PAR Photosynthetic Activ Radiation 50% (all wavelengths)  
Acoustic weakening index ~12 dB A ISO 140-3 & ISO 717-1
Certifications, Labels, Guarantees
ISO 9001 / ISO 14001 / 10 year warranty
*The technical data above are averaged values with a +/- 5% tolerance.
The buyer of our products is fully responsible for their application and their transformation with regard to any possible third party. The buyer of our products is responsible for their implementation and installation according to the standards, workmanship and safety regulations in force in destination countries. For information on our contractual warranty, please refer to the relevant terms and conditions. The values quoted above represent results of tests performed in compliance with common design practices and are provided for information only to enable customers to make the best use of our products. Our products are subject to changes based on technical advances and we reserve the right to modify their characteristics at any time. The buyer of our products is responsible for checking the validity of the above data.

HANDLING PRECAUTION : STFE membrane is delivered with a protective film which one must keep as long as possible during the STORAGE OF THE JUMBO ROLL. THE FILM MUST BE REMOVED BEFORE WELDING and INSTALLATION. STFE membrane must be packed with care and transported as rolls and not bundles to avoid crushed folds which could generate unsightly marks by transparency.

HF WELDING : consider the STFE COVERT TAPE as part of the STFE Fabrication requirement for the warranty.
Details available in the Technical Guide.
Success stories
Istanbul airport, walkway in STFE

IGA Istanbul Airport – Metro Pedestrian Road cover

STFE
Tensile architecture
Turkey
Istanbul
stfe product Serge Ferrari

Grand Palais Ephémère

STFE
Tensile architecture
France
Paris
Horatio hospital in STFE Serge Ferrari

Horatio's garden: Hospital & Botanical garden

STFE
Tensile architecture
UK
London